SUS321 Stainless Steel | SUS321 | SS321

Previous 13 / 44 Next

SUS321 Stainless Steel | SUS321 | SS321  Stainless Steel SUS321 Stainless Steel | SUS321 | SS321  Stainless Steel


We are the Leading Supplier of Stainless Steel SUS321.  
Grade 321 Stainless Steel (SS321) is 
the basic austenitic 18/8 steel (SUS 304) stabilised by Titanium (SUS321) or Niobium (SUS347) additions.

We supply and export to Singapore , Indonesia , Brunei and other ASEAN Countries.  
Our specialty is to provide wide range of stainless steel
 with no minimum order (MOQ).

E Steel supply Stainless Steel SUS321 (SS321) Round Bars , Stainless Steel SUS321 (SS321) Plates and Sheets. 
We able to supply SUS321 in Cold Drawn Bar with h9 tolerance and Smooth Turned Round Bar (Peeled Condition).  



 

Stainless Steel SUS321 Suppliers – SUS321 , SS321 , UNS S32100 , DIN 1.4541 

SUS321 and SUS347 are the basic austenitic 18/8 steel (SUS 304) stabilised by Titanium (SUS321) or Niobium (SUS347) additions.

These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C. Grade 321 is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.


SUS321H is a modification of SUS321 with a higher carbon content, to provide improved high temperature strength.

A limitation with SUS321 is that titanium does not transfer well across a high temperature arc, so is not recommended as a welding consumable. In this case grade SUS347 is preferred – the niobium performs the same carbide stabilisation task but can be transferred across a welding arc. SUS 347 is therefore the standard consumable for welding SUS 321. Grade 347 is only occasionally used as parent plate material.

Like other austenitic grades, SS321 and SS347 have excellent forming and welding characteristics, are readily brake or roll formed and have outstanding welding characteristics. Post-weld annealing is not required. They also have excellent toughness, even down to cryogenic temperatures. SUS321 does not polish well, so is not recommended for decorative applications.

Grade SUS304L is more readily available in most product forms, and so is generally used in preference to SUS321 if the requirement is simply for resistance to intergranular corrosion after welding. However SUS304L has lower hot strength than SUS321 and so is not the best choice if the requirement is resistance to an operating environment over about 500°C.


Chemical Composition of SS321 and SS347 

Below Table shows the comparision between Stainless Steel 321 , SSS321H & SS347 : 

Grade   C Mn Si P S Cr Mo Ni N Other
SUS321 min.
max

0.08
2.00 0.75 0.045 0.030 17.0
19.0
9.0
12.0
0.10 Ti=5(C+N)
0.70
SUS321H min.
max
0.04
0.10
2.00 0.75 0.045 0.030 17.0
19.0
9.0
12.0
Ti=4(C+N)
0.70
SUS347 min.
max
0.08 2.00 0.75 0.045 0.030 17.0
19.0
9.0
13.0
Nb=10(C+N)
1.0


 

Comparison of Mechanical Properties between SUS321 and SUS347 

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
SUS 321 515 205 40 95 217
SUS 321H 515 205 40 95 217
SUS 347 515 205 40 92 201

SUS 321H also has a requirement for a grain size of ASTM No 7 or coarser.

 

Physical Properties of Stainless Steel SUS321  

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (mm/m/°C) Thermal Conductivity (W/m.K) Specific Heat 0-100°C (J/kg.K) Electrical Resistivity (nW.m)
0-100°C 0-315°C 0-538°C at 100°C at 500°C
SUS321 8027 193 16.6 17.2 18.6 16.1 22.2 500 720


 

Comparison of Specification between Stainless Steel Grade 321 and Grade 347 

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
SS 321 S32100 321S31 58B, 58C 1.4541 X6CrNiTi18-10 2337 SUS 321
SS 321H S32109 321S51 1.4878 X10CrNiTi18-10 SUS 321H
SS 347 S34700 347S31 58G 1.4550 X6CrNiNb18-10 2338 SUS 347

* These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.

Corrosion Resistance of SUS321 

Equivalent to Stainless Steel Grade SUS304 in the annealed condition, and superior if a weldment in these grades has not been post-weld annealed or if the application involves service in the 425-900°C range. Subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 60°C. Considered resistant to potable water with up to about 200mg/L chlorides at ambient temperatures, reducing to about 150mg/L at 60°C.

Heat Resistance of SS321 

Good oxidation resistance in intermittent service to 900°C and in continuous service to 925°C. These grades perform well in the 425-900°C range, and particularly where subsequent aqueous corrosive conditions are present. SUS321H has higher hot strength, and is particularly suitable for high temperature structural applications.

Heat Treatment of SUS321 Stainless Steel 

Solution Treatment (Annealing) – heat to 950-1120°C and cool rapidly for maximum corrosion resistance.

Stabilising – heat to 870-900°C for 1 hour per 25mm of thickness and air cool. Stabilisation is recommended for most severe service conditions (above 425°C) and particularly for material annealed at the upper side of the annealing temperature range.

Stress Relief – Heat to 700°C for 1 to 2 hours and air cool.

* These grades cannot be hardened by thermal treatment.

Welding -  Excellent weldability by all standard fusion methods, both with and without filler metals. AS 1554.6 pre-qualifies welding of SS321 and SS347 with Grade SS347 rods or electrodes; high silicon version of SS347 is also pre-qualified for welding of SS321.


Applications of Stainless Steel 321 , SUS321 

Typical Applications of Stainless Steel Type 321 can be used in following ways : 

  • Aircraft exhaust manifolds
  • Expansion joints
  • Bellows
  • Furnace parts
  • Heating element tubing
  • Heat Exchangers
  • Woven or welded screens for high-temperature mineral processing
  • Spiral Welded tube for burner pipes and flues
 
 

Our Sales & Supplier Network

Australia, Pakistan, Malaysia, Taiwan, China, Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, Sweden, United States, Dubai, Finland, Brunei, Germany & etc.

E Steel is the Global Metal Procurement Company in providing and sourcing raw materials to a variety of engineering industries and sectors. We work as an online B2B Metal Marketplace to help our customers in finding the required steels that are difficult to source locally.


 


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version