SS316 / SUS316 Stainless Steel Plate Supplier in Malaysia & Singapore — Cut to Size by Bandsaw Machine

E Steel Sdn. Bhd. is a supplier of SS316/316L stainless steel plates in Malaysia, supplying customers across Malaysia, Singapore & Thailand.
We stock a wide range of thicknesses up to 150mm, and we don't only supply standard full plates but we offer bandsaw cut-to-size service, so you only pay and carry away the dimensions you actually need. No minimum order required.

What Is 316 / 316L Stainless Steel Plate?

316 stainless steel is a molybdenum-bearing austenitic grade, prized for its higher resistance to pitting and crevice corrosion compared to 304, particularly in chloride-rich and marine environments.
It typically contains around 16-18% chromium, 10-14% nickel, and 2-3% molybdenum — the molybdenum addition is what sets 316 apart from 304 and makes it the standard choice for marine hardware, chemical processing, pharmaceutical equipment, and food & beverage plants exposed to salts or acids.

316L is the low-carbon variant (max 0.03% carbon vs 0.08% in standard 316), making it the preferred choice for welded components where sensitisation and intergranular corrosion at the heat-affected zone must be avoided.
Both grades are commonly stocked and sold as 316/316L dual-certified plates, meaning the material meets both specifications simultaneously.
 

SS316/316L vs SS304/304L — Why Choose 316?

• Molybdenum content gives 316 superior resistance to chlorides, salts, and acidic environments
• Better performing in marine, coastal, and pharmaceutical/food-processing applications
• Higher cost than 304, but a better long-term choice where corrosion resistance is the priority

Grade Equivalents — All the Ways Customers Search for 316

Customers across Malaysia or Singapore often search using different material code systems depending on their industry standard or drawing requirement.
The table below covers all common equivalents:

Our SS316/316L Stainless Steel Plate Stock
We stocked 316/316L stainless steel plates established mills. 

Not Just Full Plates — We Supply Bandsaw Cut-to-Size Too
E Steel supplies both full plate and bandsaw cut-to-size, down to the exact dimensions on your cutting list — including thicknesses up to 150mm.
This means you don't need to buy a full plate and cut the remainder yourself, and you don't need to source a separate cutting service. One supplier, one invoice, one delivery.

Why We Promote Bandsaw Cutting for Stainless Steel Plates
We operate multiple bandsaw cutting machines at our warehouse, dedicated to cold-cutting stainless steel plates.
Bandsaw cutting is our preferred method — and the method we recommend to customers — because it delivers:

✅ Clean, burr-minimal cut surface — ready for machining or direct use
✅ No heat-affected zone (HAZ) — the cut stays cold, so the material's corrosion resistance and mechanical properties near the edge are preserved
✅ No surface discoloration or oxide scale — unlike thermal cutting methods such as plasma cutting / laser cutting. 
✅ Nicer, straighter cutting surface — often no second facing process needed before CNC machining
✅ No minimum order quantity — from a single cut piece to a full cutting list

Bandsaw Cutting vs Plasma / Laser Cutting for Stainless Steel Plates

A common question from customers: "Why not just plasma or laser cut my plate?"
Thermal cutting methods (plasma and laser) are fast but for stainless steel — especially 316/316L used in corrosion-critical, food-grade, medical, or semiconductor applications — bandsaw (cold) cutting is generally the better choice.

In short: Plasma and laser cutting introduce heat, which can create a heat-affected zone that compromises the very corrosion resistance customers choose stainless steel — and specifically 316/316L — for in the first place.
Bandsaw cold-cutting avoids this entirely, which is why we recommend it as the default method for stainless steel plate, particularly for thicker sections and critical applications.
 

Chemical Composition of SS316/316L Stainless Steel Plates

Mechanical Properties of 316/316L Stainless Steel Plates

Why Choose E Steel for Your 316 / 316L Plates?

✅ Ready Stock in Malaysia 
Our 316/316L plates are in stock at our Malaysia warehouse, ready to cut and deliver.

✅ Serving Malaysia & Singapore + Southeast Asia Markets 

✅ Full Plate or Cut to Size
Your Choice Order a full plate, or send us your cutting list and we bandsaw cut it to your exact dimensions, up to thk150mm.

✅ No Minimum Order Quantity (MOQ)
Whether you need one piece cut to size or a full plate, we accommodate all order sizes — ideal for prototyping, R&D, and small-batch production.

✅ Multiple Mill Origin Options Choose from Taiwan (YYS), China (Tsinghan Mill), or Europe and traceability comes with Mill Test Certificate (MTC). 

 

Our motto: Right Metals, Right Specifications to Right Industry.

E Steel is a global metal supply chain company supplying and sourcing special steel raw materials for engineering industries across the ASEAN region and beyond. We help our customers source steels that are difficult to source locally.

Our Sales & Supplier Network: Australia · Pakistan · Malaysia · Taiwan · China · Vietnam · Belgium · Japan · South Korea · Philippines · France · United Kingdom · Indonesia · Thailand · Hong Kong · Sweden · United States · Dubai · Finland · Brunei · Germany & more.