- B2B Metal and Engineering Marketplace
- Alloy Steel
- Aluminium
- Carbon Steel
- Copper Alloy
- Hardox Plate
- Metal Cutting Services
- Nickel Alloy
- Plastic Mould Steel
- Precision Ground Plate
- Stainless Steel
- Stainless Steel Shim Plate , Carbon Steel Shim Plate
- Structure Steel
- Titanium
- Tool Steel
- Others
E STEEL SDN. BHD.
3, Lorong Sungai Puloh 7/KU6, Kawasan Perindustrian Sungai Puloh, 42100 Klang, Selangor, Malaysia.
+603-3292 8686
Hardox 400 Round Bar | Hardox Steel Bar
Previous | 2 / 5 | Next |
Hardox 400 Round Bar Suppliers - Origin Sweden
Hardox round bars are versatile, ready-to-use, abrasion-resistant steels that combine high toughness, good bendability and good weldability.
Hardox round bars come in diameters between 40 and 100 mm and lengths up to 5000 mm, and feature the same guaranteed properties as the wear plate.
Delivered quenched and tempered to high tensile strength and hardness levels, Hardox round bars represent entirely new possibilities for stronger and lighter product design. They also help optimize workshop procedures such as machining, welding and polishing.
Hardox round bars come in diameters between 40 and 100 mm and lengths up to 5000 mm, and feature the same guaranteed properties as the wear plate.
Delivered quenched and tempered to high tensile strength and hardness levels, Hardox round bars represent entirely new possibilities for stronger and lighter product design. They also help optimize workshop procedures such as machining, welding and polishing.
Mechanical Properties of Hardox 400 Rods
Bar Diameter : 40mm - 100mm
Hardness (HBW) : 370 - 430
Typical Yield Strength (MPA) : 1000 - 1100
Hardness (HBW) : 370 - 430
Typical Yield Strength (MPA) : 1000 - 1100
Impact Properties of Hardox 400 Shaft
Longitudinal test, Typical Impact energy, Charpy V 10 x10 mm test specimen : 45 J / -40 C
Longitudinal test, Guaranteed impact energy, Charpy V 10x10 mm test specimen. : Min. 27 J / -40 C
Fabrication & Other Recommendations for Hardox 400 Bars
WELDING , BENDING AND MACHINING Hardox 400 is not intended for further heat treatment.
It has obtained its mechanical properties by quenching and when necessary by means of subsequent tempering. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 250ºC.
Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product. Grinding, especially of primer coated plates, may produce dust with a high particle concentration.
Our Sales & Supplier Network
E Steel has a Wide Global Sourcing and Sales Networking including :
Australia, Pakistan, Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.