- B2B Metal and Engineering Marketplace
- Alloy Steel
- Carbon Steel
- Copper Alloy
- Hardox Plate
- Metal Cutting Services
- Nickel Alloy
- Plastic Mould Steel
- Precision Ground Plate
- Stainless Steel
- Steel Shim Plate
- Structure Steel
- Titanium
- Tool Steel
E STEEL SDN. BHD.
3, Lorong Sungai Puloh 7/KU6, Kawasan Perindustrian Sungai Puloh, 42100 Klang, Selangor, Malaysia.
2510 Steel
Previous | 5 / 8 | Next |
We supply full range of Carbon Steel sheets, Carbon steel round bar , Carbon steel rod, Carbon steel plate, Alloy steel , hardened steel , Case Hardened Steel ,Special Steel ,Tool Steel ,Case harden Steel
Our specialty is to provide wide range of alloy steel with no minimum order.( no MOQ )
Description
1.2510, 100MnCrW4, O1, SKS3, DF2, DF3
2510 with chromium-manganese content possessed good machinability, mechanical wear resistance and edge holding quality. Vanadium-Wolfram content reduces high working temperature wear and retention of temper temperature.
DIN | AISI | JIS | Chemical Composition | |||||||||||
C | Si | Mn | P | S | Co | Cr | Mo | Ni | V | W | Cu | |||
1.2510 | O1 | SKS3 | 0.90 to 1.05 | 0.15 to 0.35 | 1.00 to 1.20 | < 0.035 | < 0.035 | – | 0.15 to 0.35 | – | – | 0.05 to 0.15 | 0.50 to 0.70 | – |
Relevant Steel Specification of AISI O1 Tool Steel
Country | USA | German | Japan |
Standard | ASTM A681 | DIN EN ISO 4957 | JIS G4404 |
Grades | O1 | 1.2510/100MnCrW4 | SKS3 |
ASTM O1 Tool Steel Mechanical Properties
Properties | Metric | Imperial |
Hardness, Brinell (soft annealed -delivery condition) | 190 | 190 |
Hardness, Rockwell C (tempering temp 300-1200°F) | 34.0-64.0 | 34.0-64.0 |
Elastic modulus (hardened to 62 HRC) | 193 GPa | 28000 ksi |
Elastic modulus (@399°C/750°F, hardened to 62 HRC ) | 172 GPa | 25000 ksi |
Elastic modulus (@191°C/375°F, hardened to 62 HRC) | 186 GPa | 27000 ksi |
Compressive yield strength (0.2%, hardened to 50 HRC) | 1350 MPa | 196000 psi |
Compressive yield strength (0.2%, hardened to 55 HRC) | 1800 MPa | 261000 psi |
Compressive yield strength (0.2%, hardened to 60 HRC) | 2150 MPa | 312000 psi |
Compressive yield strength (0.2%, hardened to 62 HRC) | 2200 MPa | 319000 p |
Properties
General purpose oil hardening medium alloyed cold work tool steel with minimum size change, high impact strength
and hardenability, good edge holding, abrasion resistance and machinability properties, dimensionally stable during
heat treatment, high surface hardness and sufficent toughness after hardening and tempering.
Applications
Cutting, blanking, punching and stamping tools and dies up to 6 mm sheet thickness, thread cutting tools, chasers, cold forming tools, arbors, drill bushings, collets, drawing punches, machine knives for the wood, paper and metal working industries, woodworking tools, cold trimming dies, shaping wheels, measuring tools and gauges, milling cutters, drills, reamers, taps, broaches, calipers, profile rollers, coining tools, industrial blades, moulds for the plastics industry, knurling tools, medium run blanking dies, cold working manrdrels, master engraving rolls and taps, guide rails, plug gages.
Heat treatment
Stress relieving Temperature : Approx. 650 °C in the annealed state
Duration : 1 hour per 50 mm wall thickness
Soft annealing Temperature : 750 °C
Duration : 1 hour per 25 mm wall thickness
Hardening Temperature : 830 °C
Duration : 1 minute per mm wall thickness
Quenching hardness Max. 64 HRC in oil, hot bath or vacuum
Tempering Temperature : See tempering curve
Duration : 1 hour per 25 mm wall thickness
Cooling : Air
Working hardness 58–62 HRC