Stainless Steel Shim Plate 301 , Spring Plate SUS301 , SS301 Shim Coil

Previous 1 / 3 Next

Stainless Steel Shim Plate 301 , Spring Plate SUS301 , SS301 Shim Coil Stainless Steel Shim Plate , Carbon Steel Shim Plate Stainless Steel Shim Plate 301 , Spring Plate SUS301 , SS301 Shim Coil Stainless Steel Shim Plate , Carbon Steel Shim Plate Stainless Steel Shim Plate 301 , Spring Plate SUS301 , SS301 Shim Coil Stainless Steel Shim Plate , Carbon Steel Shim Plate


We are the Leading Supplier of Stainless Steel Shim Plate 301.   
SUS301 Stainless Steel is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel.

We export to Singapore , Indonesia , Brunei , Australia and other ASEAN Countries.  
Our specialty is to provide wide range of stainless steel with no minimum order.

E Steel supply Stainless Steel 301 Spring Plate , Stainless Steel 301 3/4Hard Shim Plates and Stainless Steel 301 Full Hard Shim Plates with the range of thickness 0.0127mm - 2.0mm 
E Steel is glad to be the Stainless Steel 301 (SUS301, SS301 Spring Steel) Suppliers Singapore , exporting to Singapore with shortest lead time , may refer : 
https://www.ecarbonsteel.com/index.php?ws=latestnews&nid=96307



It is glad that you can purchase Stainless Steel Shim Plate through our Shopee Store : https://shopee.com.my/shop/324872858/search?page=0&shopCollection=133800327


SUS301 Shim Plates Suppliers - SS301 Stainless Steel Spring Shim Technical Data Sheet

Alloy UNS Number SAE Number
 SUS 301   S30100   30301

SUS301 Stainless Steel is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel. The high strengths of this grade of steel in the six available conditions or tempers, its resistance to atmosphere corrosion and its bright, attractive surface make it an excellent choice for decorative structural applications. Automobile molding and trim, wheel covers, conveyor belts, kitchen equipment, roof drainage systems, hose clamps, springs, truck and trailer bodies, railway and subway cars are some of the major applications for this versatile grade. By varying the chemical composition within the limits set by the ASTM specifications and by temper rolling, a broad range of magnetic and mechanical properties can be obtained for a variety of applications.

 

Corrosion Resistance of SUS301 Shim Plates / Shim Coil 

SS301 is resistant to a variety of corrosive media. However, the corrosion properties are not as good as the 18-8 chromium-nickel steels. Its susceptibility to carbide precipitation during welding restricts its use in many applications in favor of SUS 304 or SUS 304L.


Physical Properties of Stainless Steel 301 Spring Plates 

Melting Point Density Specific Gravity Modulus of Elasticity
in Tension
  2550-2590° F
1399-1421° C
  .29 lb/in³
8.03g/cm³
  8.03   28 X 106 psi
193 Gpa

 

Chemical Properties of SS301 Shim Plates 

Alloy C Mn P S Si Cr Ni Mo Cu N Other
301 .15 2.00 .045 .030 .75 16.00-18.00 6.00-8.00 .75 .75 .10

* All values are maximum values unless otherwise specified. Values are derived from applicable AMS and ASTM specifications.

 

Mechanical Properties of SUS301 Shim Plates / Spring Plates 

Grade Code As Rolled After Low-temperature Annealing Bendability
Hardness Tensile strength Elongation Spring deflection limit Hardness Tensile strength Elongation Spring deflection limit
HV N/mm2 % N/mm2 HV N/mm2 % N/mm2
  SUS301 SEH ≥ 530 ≥ 1810 (≥ 650) ≥ 550 ≥ 1940 (≥ 880)
EH ≥ 490 ≥ 1570 (≥ 590) ≥ 505 ≥ 1665 (≥ 785)
H ≥ 430 ≥ 1320 (≥ 490) ≥ 440 ≥ 1400 (≥ 655) *4t R90° bending available
3/4H ≥ 370 ≥ 1130 ≥ 5 (≥ 390) ≥ 380 ≥ 1175 ≥ 4 (≥ 540) 2.5t R90° bending available
1/2H ≥ 310 ≥ 930 ≥ 10 (≥ 315) ≥ 315 ≥ 960 ≥ 8 (≥ 390) 2t R90° bending available
1/4H ≥ 250 ≥ 860 ≥ 25 ≥ 253 ≥ 880 ≥ 20 1t R90° bending available

 

Tolerance of Stainless Steel Spring Shim , SUS301 Shim Plates 

Specified Thickness (inch)  Thickness Tolerances - Inch
For the thickness and widths given 
  Width 
  3/16 to 6 Inch Over 6 to 12 Inch  Over 12 to 24 Excl.
.005 to .010 Incl. 10% 10% 10%
Over .010 to .011 Incl. .0015 .0015 .0015
Over .011 to .013 Incl. .0015 .0015 .002
Over .013 to .017 Incl. .0015 .002 .002
Over .017 to .020 Incl. .0015 .002 .002
Over .020 to .029 Incl. .002 .0025 .0025
Over .029 to .035 Incl. .002 .003 .003
Over .035 to .050 Incl. .0025 .0035 .0035
Over .050 to .069 Incl. .003 .0035 .0035
Over .069 to .100 Incl. .003 .004 .005
Over .100 to .125 Incl. .004 .0045 .005
Over .125 to .161 Incl. .0045 .0045 .005
Over .161 to 3/16 Excl. . .005 .005 .006

* Note 1: Thickness measurements are taken at least 3/8 inch in from edge of the strip, except that on widths less than 1 inch the tolerances are applicable for measurements at all locatons.
* Note 2: Above tolerances include crown.



 

SUS301 Shim Plate , SS301 Stainless Steel Spring Shim Sheets Suppliers Thailand

E Steel is glad to export and supply SUS301 Shim with the Japan Origin (Nippon Steel Mill) to one of the CNC Manufacuturing Service provider in Thailand

 



 

Our Sales & Supplier Network

Australia, Pakistan,  Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.

E Steel is a Global Metal Procurement Company in providing and sourcing raw materials to the wide range of engineering industries / sectors.  We works as the the Online B2B Metal Marketplace to help our customers in finding the special steels that might feel hard to source locally.  


 

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version