- B2B Metal and Engineering Marketplace
- Alloy Steel
- Aluminium
- Carbon Steel
- Copper Alloy
- Hardox Plate
- Metal Cutting Services
- Nickel Alloy
- Plastic Mould Steel
- Precision Ground Plate
- Stainless Steel
- Stainless Steel Shim Plate , Carbon Steel Shim Plate
- Structure Steel
- Titanium
- Tool Steel
- Others
E STEEL SDN. BHD.
3, Lorong Sungai Puloh 7/KU6, Kawasan Perindustrian Sungai Puloh, 42100 Klang, Selangor, Malaysia.
Incoloy 825 | Nickel Alloy 825 | N08825
Previous | 10 / 26 | Next |
INCOLOY alloy 825 is a nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium.
We supply and export to Singapore , Indonesia , Brunei and other ASEAN Countries.
Our specialty is to provide wide range of stainless steel with no minimum order (MOQ).
E Steel supply Incoloy 825 (Nickel Alloy 825) Round Bars / Rods / Shafts , Incoloy 825 (Nickel Alloy 825) Hexagon Bars , Incoloy 825 (Nickel Alloy 825) Plates.
We are also the Incoloy Alloy 825 Suppliers Yalalevu (Fiji Island) , may refer : https://www.ecarbonsteel.com/index.php?ws=latestnews&nid=97995
Incoloy 825 Suppliers - Nickel Alloy 825 , UNS N08825 , DIN 2.4858
INCOLOY alloy 825 is a nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium.
The nickel content is sufficient for resistance to chloride-ion stress-corrosion cracking. The nickel, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulfuric and phosphoric acids.
The molybdenum also aids resistance to pitting and crevice corrosion.
The alloy’s chromium content confers resistance to a variety of oxidizing substances such as nitric acid, nitrates and oxidizing salt.
The titanium addition serves, with an appropriate heat treatment, to stabilize the alloy against sensitization to intergranular corrosion.
Chemical Composition of Nickel Alloy 625
The following table shows the chemical composition for Incoloy 825 :
Element |
% |
Element |
% |
Nickel |
38.0 – 46.0 |
Carbon |
0.05 max |
Chromium |
19.5 – 23.5 |
Manganese |
1.0 max |
Molybdenum |
2.5 – 3.5 |
Sulfur |
0.03 max |
Copper |
1.5 – 3.0 |
Silicon |
0.5 max |
Titanium |
0.6 – 1.2 |
Aluminium |
0.2 max |
Iron |
22.0 min (~33%) |
|
Mechanical Properties of Incoloy Alloy 825
General mechanical properties of Nickel Alloy 825 is shown as below :Tensile (ksi) | .2% Yield (ksi) |
85 | 30-35 |
Alloy 825 has good mechanical properties from cryogenic temperatures to moderately high temperatures.
However, exposure to temperatures above 1000° F can result in microstructural changes that significantly lower ductility and impact strength. Alloy UNS N08825 should not be used at temperatures where creep-rupture properties are design factors.
Specifications
INCOLOY Alloy 825 is designated as UNS N08825 and Werkstoff Number 2.4858. It is listed in NACE MR0175 for oil and gas service.
Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. Incoloy Alloy 825 is a Registered Trademarks of Special Metals Corporation and Its subsidiaries.
Our Sales & Supplier Network
Australia, Pakistan, Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.
E Steel is a Global Metal Procurement Company in providing and sourcing raw materials to the wide range of engineering industries / sectors. We works as the the Online B2B Metal Marketplace to help our customers in finding the special steels that might feel hard to source locally.