Ferralium 255 | Super Duplex S32550 Stainless Steel

Previous 35 / 43 Next

Ferralium 255 | Super Duplex S32550 Stainless Steel Stainless Steel


We are the Leading Supplier of Stainless Steel Super Duplex S32550.  
Stainless Steel S32550 (Ferralium 255) is Super Duplex Stainless Steel supplied in the hot worked and annealed condition.

We supply and export to Singapore , Indonesia , Brunei and other ASEAN Countries.  
Our specialty is to provide wide range of stainless steel
 with no minimum order (MOQ).

E Steel supply Stainless Steel Super Duplex S32550 (Ferralium 255 , F61 Duplex) Round Bars / Rods / Shafts , Super Duplex S32550 (Ferralium 255) Plates 




Description

Super Duplex S32550 Suppliers - Ferralium 255 , 1.4507, F61 Duplex Stainless Steel

Ferralium® 255 – Super Duplex 4507 is a Super Duplex Stainless Steel supplied in the hot worked and annealed condition. It achieves higher strengths than most stainless steels and alternative corrosion resistant alloys, offering the potential to reduce section size and therefore weight and cost.

As a 25% Cr alloy, with significant additions of copper, Ferralium® 255 offers excellent corrosion resistance in a wide variety of corrosive chemicals including sulphuric, nitric and phosphoric acid. In seawater and other chloride containing environments it also provides outstanding resistance to pitting and crevice corrosion, with Critical Pitting Temperature exceeding 50°C. Excellent ductility and impact strength at both ambient and sub-zero temperatures combine with a high resistance to abrasion, erosion and cavitation erosion.

Listed in NACE MR 01 75 for sour service and having gained ASME Approval for Pressure Vessel applications, Ferralium® 255-SD50 is tested to the highest degree using tests designed to guarantee that the trade-marked product possesses high integrity, a correct phase balance and the absence of sigma and other deleterious phases.


Chemical Composition of Super Duplex S32550 

Cr = 25.5 | Ni = 5.5 | Mo = 3.4 | C = 0.04 | Mn = 1.5 | Si = 1.0 | Fe = Bal | N = 0.175 | S = 0.030 | Cu = 2.00 | P = 0.040


Applications of Ferralium 255 , S32550 Super Duplex 

FERRALIUM 255 is a cost effective alternative to materials such as the nickel alloys, 20 type alloys, brass and bronze. Marine environments have long been the domain of admiralty bronze. Alloy 255 is replacing admiralty bronze, and the nickel alloys, in offshore platforms, deck hardware, rudders and shafting.

Alloy 255 is also making inroads in “borderline” corrosion applications where the nickel alloys and high performance alloys have been used but may not have been absolutely necessary. In some instances, it has even been used to replace high performance Ni-Cr-Mo-F-Cu alloys in the phosphoric acid industry.

Valves, pumps, shafts, marine environments, Applications in down-hole, waste water, polycarbonate production, and demineralized water production.



Mechanical Properties of Alloy 255 

  Ultimate Tensile Yield Strength (0.2% OS) Elong. R/A Hardness Brinell
Min 110 KSi 80 KSi 15%    
Max         297
Min 760 MPa 550 MPa      
Max          


Super Duplex 255 is Stronger Than Most Competitive Alloys
 

Alloy UNS Typical Tensile
(Ksi)
Typical Yeild
(Ksi)
Typical Elongation
(%)
Alloy 255 S32550 126 98 30
SUS316L S31603 81 42 50
NiCu400 N04400 78 31 50
20Cb-3 N08020 92 47 39
2205 Duplex S31803 112 75 32
  • Ferralium 255 – SD50 (Super Duplex 255)
  • 4507
  • ASTM A276/A476
  • UNS S32550

Technical Data of Super Duplex 255 

Elongation Comparison
Elongation Alloy 316SS Alloy 2205 Ferralium Alloy 255
  40 25 15
Hardness Comparison
Wear Resistance Alloy 316SS Alloy 2205 Ferralium Alloy 255
Hardness RB80 RC21 RC28
Critical Pitting Temperature Comparison
Critical Pitting Temperature Alloy 316SS Alloy 2205 Ferralium Alloy 255
Degree C ASTM
G48-Method A
0 20 40
Pitting Potential – MV Comparison
Temperature Alloy 316SS Alloy 2205 Ferralium Alloy 255
50 °C 60 370 No Pitting
60 °C No Test No Test 110
60 °C No Test No Test 170
Critical Crevice Comparison
Critical Crevice Temperature Alloy 316SS Alloy 2205 Ferralium Alloy 255
Degree C ASTM
G48-Method B
(10% FE CL 6H 0)
-2.5 17.5 22.5
C Ring Stress Cracking Comparison
C Ring Stress Cracking Alloy 316SS Alloy 2205 Ferralium Alloy 255
80 Degree C Stressed to 100% Yield Strength, H2S
0.125 Bar, Sour Brine with 46,000 MG/L Chloride
Cracks Fine Cracks No Cracks
PREN No. Comparison
Resistance to Localized Corrosion Alloy 316SS Alloy 2205 Ferralium Alloy 255
PREN No. CR + 3.3(MO) + 16(N) 23.6 34.5 40
Corrosion Rates Comparison
Corrosion Rates MPY Alloy 316SS Alloy 2205 Ferralium Alloy 255
10% Sulfuric Boiling 855 206 40
65% Nitric Boiling 11 21 5



Our Sales & Supplier Network

E Steel has a Wide Global Sourcing and Sales Networking including : 
Australia, Pakistan,  Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.




Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version